Three dimension Water Vapour Electric Fireplace
BB 3D fireplace
Reaslistic Flame Tchnology you have to see to believe
BB 3D three dimension fake real fire electric fireplace, it was fabricated without any screen design.
Make use of the Led light to produce the flame that seems come out from the wood to the air like burning. The smoke with the flame comes out from the wood as well.
There is no duct work, not produce of any heat
Energy save, easy to install and handle
220V 50Hz flame power 210W
It is the best three dimension fake real fire electric fireplace at this moment.
We provide stock items and tailor made items for your selection.
E-mail : firstname.lastname@example.org
Hong Kong Tel: 852-69318059
China contact telephone: 86-13714791523
Mr. Peter Ma
BB 3D Water Vapour Electric Fireplace
O & M
1. The power supply is 250V 10A flame power 210W
2. The water capacity is about 900ml, it depends on the size of the fireplace.
3. Do not re-move the fireplace after fill of distilled water otherwise the fireplace will be broken shortly. If you want to move the fireplace you should take out the water before move it.
4. It needs holes for air to come into the fireplace to produce flame with smoke.
5. BB 3D three dimension fireplace needs distilled water, do not use tap or dirty water. Do not put too much of water into the fireplace when you hear a drop sound warning.
6. There will be no fire when water is empty.
How to install
1) Put the 3D fireplace in the place where it will be installed.
2) Full distilled water can be used for 6 hours depends on the fire size of fireplace.
3) Turn on the power, about 3 minutes the flame with smoke will come out automatically.
We recommend the 3D water vapour fireplace have to close down over used for 4 hours.
If the fireplace running out of water, the light will be lightened. You have to close it for half an hour to cool it down and refill with distilled water.
BB 3D Water Vapour Electric Fireplace Specification
1. The dimension of the 3D water vapour fireplace can be custom made of any WxHxD mm
2. It can be wood log or the stone on the surface of the fireplace. The height of the wood log or the stone is approx. 150-200mm;
3. The power supply is 220V 50Hz flame power 210W
4. Normally the water capacity is 1 liter or more depends on the size of the fireplace
5. Make use of the air can come in the fireplace and the light can produce the flame with smoke that seems come out from the wood or stone to the air like burning.
6. There are fans under the log, whenever to re-move the fireplace, it must to take all the water out from the water tank otherwise the fireplace will be broken with short circuit.
7. BB 3D fake real fire electric fireplace, it was fabricated without any screen design
8. There is no duct work, chimney and not produce of heat
9. Energy save, easy to install and handle
10. Can be see through the fireplace.
Black or White Pebbie three dimension fireplace
New BB 3D Water Fireplace